The Frame

Its time to build the frame. For my fusor I will have a box. Inside will be all the circuitry, the front panel will have the controls on it and there will be no back panel so i can easily access everything if i need to. On the top of this box will be the vacuum chamber and the pump. I will have a wooden panel on top of the chamber and wingnuts connected to pillers coming up from the box. Tightening the wingnuts will push down on the vacuum chamber pushing it into a rubber sheet. This will allow me to create a better air seal but will also allow me to open up the chamber and service it if necessary. Once you have drilled it all together its time to move on!

Next: The Grids